缅甸华纳国际网投

卷板機
大型液壓機卷板機制造商 | 手機站 | English
熱門產品:

新聞資訊

news
最新資訊
news

常見問題
questions

冷卷和熱卷兩款卷板機工作狀況簡單介紹

發布日期:2017-11-11 21:11:43 來源: 瀏覽:

卷板機是一種將金屬板材卷彎成筒形、弧形或其它形狀工件的通用設備,構簡單、重量輕、易于制造維修、投資少。此性能被大寬度的使用正在造物、鍋爐蒸汽、化工、非金屬構造及機器打造等事業上。具有卷制O型、U型、多段R等不同形狀板材的功能。根據三點成圓的原理,利用工件相對位置變化和旋轉運動使板材產生連續的塑性變形,以獲得預定形狀的工件。由于結構簡單,性能可靠,造價低廉,已經廣泛用于鍋爐、造船、石油、木工、金屬結構及其它機械制造行業。

Plate bending machine is a kind of general equipment which can bend the metal plate roll into cylinder, arc or other parts. It is simple in structure, light in weight, easy to manufacture, maintenance and low in investment. This performance is widely used in the creation, boiler steam, chemical, non-metallic structure and machine building and other undertakings. It has the functions of rolled O, U and multi section R plates with different shapes. According to the principle of three point rounding, the continuous plastic deformation of the plate is obtained by the relative position change and rotation motion of the workpiece, so as to obtain the workpiece with a predetermined shape. Due to its simple structure, reliable performance and low cost, it has been widely used in boilers, shipbuilding, petroleum, carpentry, metal structures and other machinery manufacturing industries.


卷板機按照工作狀況分為:冷卷和熱卷兩種。工作能力是指板材在冷態下,按規定的屈服極限卷制最大板材厚度與寬度時最小卷筒直徑的能力。當卷制板厚較大或彎曲半徑較小并超過設備工作能力時,在設備允許的前提下可采用熱卷的方法。個別不允許冷卷的板材,熱卷剛性太差,則采用溫卷的方法。

According to the working conditions of rolling machine is divided into two kinds: cold rolled and hot rolled. Work capacity refers to the capacity of the plate to be rolled in the cold state according to the specified yield limit and the maximum diameter and thickness of the maximum plate. When the rolling thickness is larger or smaller than the bending radius and work capability of the equipment, in under the premise of device allows the coil. The individual does not allow the cold rolled sheet, coil rigidity is too poor, adopts the method of the temperature volume.


以下內容由南通特力卷板機有限公司提供!

上一篇: 現代卷板機已經發展到了一個新的高度 下一篇: 卷板機更好保養效果的注意事項

熱門產品

Hot Products
型材彎曲機
型材彎曲機
800T框架伺服液壓機
800T框架伺服液壓機
大型船用卷板機
大型船用卷板機
大型H型材彎曲機
大型H型材彎曲機

熱門資訊

news
首 頁 | 關于特力 | 企業榮譽 | 新聞動態 | 廠容廠貌 | 售后服務 | 網站地圖 | SiteMap | 新聞RSS | 產品RSS | 企業郵局
百度分享
銷售熱線:(0)13901478948 / 15996599997  電話:0513-88349428 / 88283684
主營:卷板機液壓機三輥卷板機四輥卷板機船用卷板機
CopyRight © 2003-2017 版權所有 南通特力鍛壓機床有限公司 All Rights Reserved.
蘇ICP備05000862號 技術支持:旗下